Operation options Liquicap M FMI51 HART
36 Endress+Hauser
Selecting a function and subfunction
If the function level has been reached, it is possible to navigate through the functions with
and . The current values of all the related subfunctions are displayed.
1. Press or to select the ordered function.
2. Press to enter the selected function.
3. Press or to select the ordered subfunction.
4. Press to enter the selected function.
If the function has only one subfunction, than the soft keys are not displayed.
Return to the next-highest menu level any time by pressing "Escape" → 33.
Editing functions with the picklist
1. Press or to select the ordered option.
2. Press to select this option.
The new value is now transferred to the device.
Edit another subfunction in the same way.
Return to the next-highest menu level any time by pressing "Escape" → 33.
Editing numeric and alphanumeric functions
If you select a numeric function like "Empty calibration" , "Full calibration" or an
alphanumeric function like "Device marking" , the editor for numbers or alphanumeric
characters opens.
1. Press or until this position shows the ordered value.
2. Press to enter the value and go to the next position.
3. Repeat step for the next position.
4. Once all the necessary positions have been entered, press or until
appears at the marker.
5. Press to transfer the entire value to the device.
Special functions when making entries
They also call up the following symbols for special editing tasks which make inputting
information easier and make it possible to make corrections quickly.
In the editor for numbers and alphanumeric characters, the and keys
not only call up numbers and letters.
A0040580
13 The number to the left of the marker is transferred to the device.
A0040581
14 Exit the editor. The old function value remains.
To Next Page
Loading...