Endress+Hauser Proline Promass E 300 - Supported Operating Tools

Technical data Proline Promass E 300 PROFINET
250 Endress+Hauser
Housing material
The housing material of the display and operating module DKX001 depends on the choice
of transmitter housing material.
Transmitter housing Remote display and operating module
Order code for "Housing" Material Material
Option A "Aluminum, coated" AlSi10Mg, coated AlSi10Mg, coated
Cable entry
Corresponds to the choice of transmitter housing, order code for "Electrical connection".
Connecting cable
→  31
Dimensions
Information on the dimensions:
"Mechanical construction" section of the "Technical Information" document.
Remote operation →  68
Service interface →  69
Supported operating tools Different operating tools can be used for local or remote access to the measuring device.
Depending on the operating tool used, access is possible with different operating units and
via a variety of interfaces.
Supported operating
tools
Operating unit Interface Additional information
Web browser Notebook, PC or tablet
with Web browser
• CDI-RJ45 service
interface
• WLAN interface
• Ethernet-based
fieldbus (EtherNet/IP,
PROFINET)
Special Documentation for
device →  257
DeviceCare SFE100 Notebook, PC or tablet
with Microsoft Windows
system
• CDI-RJ45 service
interface
• WLAN interface
• Fieldbus protocol
→  227
FieldCare SFE500 Notebook, PC or tablet
with Microsoft Windows
system
• CDI-RJ45 service
interface
• WLAN interface
• Fieldbus protocol
→  227
Other operating tools based on FDT technology with a device driver such as DTM/
iDTM or DD/EDD can be used for device operation. These operating tools are available
from the individual manufacturers. Integration into the following operating tools,
among others, is supported:
• Field Device Manager (FDM) by Honeywell → www.honeywellprocess.com
• FieldMate by Yokogawa → www.yokogawa.com
• PACTWare → www.pactware.com
The associated device description files are available at: www.endress.com →
Downloads