Endress+Hauser Proline Promass F 300 - 10.5.11 Configuring the Local Display

Commissioning Proline Promass F 300 EtherNet/IP
128
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Switch-on delay In the Relay output function
parameter, the Limit option is
selected.
Define delay for the switch-on
of status output.
0.0 to 100.0 s 0.0 s
Failure mode – Define output behavior in
alarm condition.
• Actual status
• Open
• Closed
Open
* Visibility depends on order options or device settings
10.5.11 Configuring the local display
The Display wizard guides you systematically through all the parameters that can
configured for configuring the local display.
Navigation
"Setup" menu → Display
‣
Display
Format display
→  129
Value 1 display
→  130
0% bargraph value 1
→  131
100% bargraph value 1
→  131
Value 2 display
→  132
Value 3 display
→  134
0% bargraph value 3
→  135
100% bargraph value 3
→  136
Value 4 display
→  137