Endress+Hauser Proline Promass F 300 - WLAN Configuration

Commissioning Proline Promass F 300 EtherNet/IP
158
Parameter Prerequisite Description Selection / User
entry
Factory setting
Header A local display is provided. Select header contents on local
display.
• Device tag
• Free text
Device tag
Header text In the Header parameter, the
Free text option is selected.
Enter display header text. Max. 12 characters
such as letters,
numbers or special
characters (e.g. @,
%, /)
------------
Separator A local display is provided. Select decimal separator for
displaying numerical values.
• . (point)
• , (comma)
. (point)
Backlight One of the following
conditions is met:
• Order code for "Display;
operation", option F "4-line,
illum.; touch control"
• Order code for "Display;
operation", option G "4-line,
illum.; touch control
+WLAN"
• Order code for "Display;
operation", option O
"Separate 4-line display,
illum.; 10m/30ft cable;
touch control"
Switch the local display
backlight on and off.
• Disable
• Enable
Enable
* Visibility depends on order options or device settings
10.6.6 WLAN configuration
The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Navigation
"Setup" menu → Advanced setup → WLAN settings
‣
WLAN settings
WLAN
→  159
WLAN mode
→  159
SSID name
→  159
Network security
→  159
Security identification
→  159
User name
→  159
WLAN password
→  159