Endress+Hauser Proline Promass F 300 - Output Values

Proline Promass F 300 EtherNet/IP Operation
175
Parameter overview with brief description
Parameter Description User interface
Value status input Shows the current input signal level. • High
• Low
11.4.4 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
‣
Current output 1 to n
→  175
‣
Pulse/frequency/switch output
1 to n
→  176
‣
Relay output 1 to n
→  176
Output values of current output
The Value current output submenu contains all the parameters needed to display the
current measured values for every current output.
Navigation
"Diagnostics" menu → Measured values → Output values → Value current output 1 to n
‣
Current output 1 to n
Output current 1 to n
→  175
Measured current 1 to n
→  175
Parameter overview with brief description
Parameter Description User interface
Output current 1 Displays the current value currently calculated for the current
output.
3.59 to 22.5 mA
Measured current Displays the current value currently measured for the current
output.
0 to 30 mA