Proline Promass F 300 EtherNet/IP Accessories
219
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1 For the transmitter
Accessories Description
Transmitter Promass300 Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output
• Input
• Display / operation
• Housing
• Software
Order code: O8X3BXX
For details, see Installation Instructions EA01150
Remote display and
operating module
DKX001
• If ordered directly with the measuring device:
Order code for "Display; operation", option O "Separate 4-line display, illum.;
10 m (30 ft)Cable; touch control".
• If ordered separately:
– Measuring device: order code for "Display; operation", option M "None,
prepared for separate display".
– DKX001: Via the separate product structure DKX001.
• If ordered subsequently:
DKX001: Via the separate product structure DKX001.
Mounting bracket for DKX001
• Ordered directly with the DKX001:
Order code for "Enclosed accessories", option RA "Mounting bracket, 1"/2" pipe".
• If ordered subsequently: order number: 71340960
Connecting cable (replacement cable)
Via the separate product structure: DKX002
Further information on display and operating module DKX001→ 247.
For details, see Special Documentation SD01763D
External WLAN antenna External WLAN antenna with 2 m (6.6 ft)connecting cable and two angle brackets.
Order code for "Enclosed accessories", option P8 "Wireless antenna wide area".
Further information on the WLAN interface → 75.
Protective cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.
Order number: 71343505
For details, see Installation Instructions EA01160
To Next Page
Loading...
