Endress+Hauser Proline Promass F 300 - 12.14 Firmware History

Proline Promass F 300 EtherNet/IP Diagnostics and troubleshooting
215
Parameter Description User interface Factory setting
Extended order code 1 Shows the 1st part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 2 Shows the 2nd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 3 Shows the 3rd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string 2.02.00
12.14 Firmware history
Release
date
Firmware
version
Order code
for
"Firmware
version"
Firmware
changes
Documentation
type
Documentation
10.2017 01.00.zz Option 77 Original firmware Operating
Instructions
BA01807O
It is possible to flash the firmware to the current version or the previous version using
the service interface.
For the compatibility of the firmware version with the previous version, the installed
device description files and operating tools, observe the information about the device
in the "Manufacturer's information" document.
The manufacturer's information is available:
• In the Download Area of the Endress+Hauser web site: www.endress.com →
Downloads
• Specify the following details:
– Product root: e.g. 8F 3B
The product root is the first part of the order code: see the nameplate on the
device.
– Text search: Manufacturer's information
– Media type: Documentation – Technical Documentation