Endress+Hauser Proline Promass F 300 - Performing a Totalizer Reset

Proline Promass F 300 EtherNet/IP Operation
177
Parameter overview with brief description
Parameter Description User interface
Switch status Shows the current relay switch status. • Open
• Closed
Switch cycles Shows number of all performed switch cycles. Positive integer
Max. switch cycles number Shows the maximal number of guaranteed switch cycles. Positive integer
11.5 Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using theSetup menu (→  99)
• Advanced settings using theAdvanced setup submenu (→  141)
11.6 Performing a totalizer reset
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
→  178
Preset value 1 to n
→  178
Reset all totalizers
→  178