Endress+Hauser Proline Promass F 300 - Page 172

Operation Proline Promass F 300 EtherNet/IP
172
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  102).
Signed floating-point
number
Volume flow – Displays the volume flow currently
calculated.
Dependency
The unit is taken from the Volume flow
unit parameter (→  102).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  102).
Signed floating-point
number
Density – Shows the density currently measured.
Dependency
The unit is taken from the Density unit
parameter (→  103).
Signed floating-point
number
Reference density – Displays the reference density currently
calculated.
Dependency
The unit is taken from the Reference
density unit parameter (→  103).
Signed floating-point
number
Temperature – Shows the medium temperature
currently measured.
Dependency
The unit is taken from the
Temperature unit parameter
(→  103).
Signed floating-point
number
Pressure value – Displays either a fixed or external
pressure value.
Dependency
The unit is taken from the Pressure
unit parameter (→  103).
Signed floating-point
number
Concentration For the following order code:
"Application package", option ED
"Concentration"

The software options currently
enabled are displayed in the
Software option overview
parameter.
Displays the concentration currently
calculated.
Dependency
The unit is taken from the
Concentration unit parameter.
Signed floating-point
number