Endress+Hauser Proline Prosonic Flow 93 - Nameplate of the Sensor

2 Identification PROline Prosonic Flow 93 PROFIBUS-DP/-PA
10 Endress+Hauser
2.1.2 Nameplate of the sensor
Fig. 2: Nameplate specifications for the “Prosonic Flow P” measuring sensor (example)
1 Ordering code / serial number: see the specifications on the order confirmation for the meanings of the
individual letters and digits.
2Sensor type
3 Range of nominal diameter: DN 100...4000
4 Max. fluid temperature range: –40°C (–40 °F) ... +80 °C (+175 °F)
5 Reserved for information on special products
6 Degree of protection
7 Ambient temperature range
8 Data on explosion protection. Refer to the specific additional Ex documentation for detailed information.
Please do not hesitate to contact your E+H sales office if you have any questions.
II2G
FEK0924-0001
EEx ib IIC/IIB T6-T1
DMT 01 ATEX E ... X
ENDRESS+HAUSER
CH-4153 Reinach
TYPE 6P
NEMA
IP68
Tamb/Tumg:-40°C..+60°C
control dwg. of transmitter
For Installation refer to
CL.II, GP. EFG, CL.III
Dust-Ignitionproof for
CL.II, GP.EFG, CL.III
Intrinsically safe for CL.I, GP.ABCD
APPROVED
FM
0032
PROSONIC FLOW P
XXXXX-XXXXXXXXXXXX
ENDRESS+HAUSER
P-CL-1F-L-B
12345678901 RY
-40°C (-40°F) ... +80°C (+175°F)
Order Code:
DN100-DN4000
Type:
Ser.No.:
i
2001
06/a3/....
XA059D/
OPEN CLOSE
1
2
3
4
5
7
8
6
F06-93Pxxxxx-18-05-xx-xx-001