Endress+Hauser Proline Prosonic Flow 93 - Operation via PROFIBUS Configuration Programs; FieldTool Operating Program

PROline Prosonic Flow 93 PROFIBUS-DP/-PA 5 Operation
Endress+Hauser 67
5.4 Operation via PROFIBUS configuration programs
The user can obtain special configuration and operating programs offered by different
manufacturers for use in configuration. These can be used for configuring both the
PROFIBUS-DP/-PA parameters and all of the device-specific parameters. The
predefined function blocks allow uniform access to all the network and device data.
!
Note!
A step-by-step description of the procedure for commissioning the PROFIBUS interface
is given on Page 93 together with information about the configuration of device-specific
parameters.
5.4.1 FieldTool operating program
FieldTool is a universal service and configuration software package designed for the
PROline measuring devices. Connection is by means of the PROline service interface
(service adapter).
The functionality of FieldTool includes the following:
 Configuration of device functions
 Visualisation of measuring values (including data logging)
 Data backup of device parameters
 Extended device diagnosis
 Measuring point documentation
!
Note!
You can find more information on FieldTool in the following E+H documentation:
 System Information: SI 031D/06/en “FieldTool”