Endress+Hauser Proline Prosonic Flow 93 - Brief Guide to the Function Matrix

PROline Prosonic Flow 93 PROFIBUS-DP/-PA 5 Operation
Endress+Hauser 59
5.2.2 Brief guide to the function matrix
!
Note!
 See the general notes on Page 60.
 Function descriptions  “Description of Device Functions” manual.
1. HOME position
 F  Enter the function matrix
2. Select a block (e.g. USER INTERFACE)
3. Select a group (e.g. CONTROL)
4. Select a function group (e.g. BASIC CONFIGURATION)
5. Select a function (e.g. LANGUAGE)
Change parameter / enter numerical values:
OS
 Select or enter: release code, parameters, numerical values
F
 Save your entries
6. Exit the function matrix:
– Press and hold down Esc key (X) for longer than 3 seconds
 HOME position
– Repeatedly press Esc key (X)
 Return step by step to HOME position
Fig. 57: Selecting functions and configuring parameters (function matrix)
F06-x3xxxxxx-19-xx-xx-xx-000