Endress+Hauser Proline Prosonic Flow 93 - Mechanical Construction

PROline Prosonic Flow 93 PROFIBUS-DP/-PA 10 Technical data
Endress+Hauser 149
10.1.8 Mechanical construction
Design / dimensions see Page 152 ff.
Weight Transmitter wall-mount housing: 6.0 kg
Measuring sensors:
 Flowrate measuring sensors P incl. mounting rail and tensioning band: 2.8 kg
 Flowrate measuring sensors W (Clamp On) incl. mounting rail and tensioning bands:
2.8 kg
 Flowrate measuring sensors W (Insertion / single path version): 4.5 kg
 Flowrate measuring sensors U (clamp on): 1 kg
 Flowrate measuring sensors W (Insertion / dual path version): 12.0 kg
 Sound velocity measuring sensors DDU 18 incl. tensioning bands: 2.4 kg
 Wall thickness measuring sensor DDU 19 incl. tensioning band: 1.5 kg
Material Transmitter housing 93 (wall-mount housing):
Powder-coated die-cast aluminum
Standard designations of the materials
(measuring sensors P / W / U / DDU 18 / DDU 19):
DIN 17660 UNS
Sensor housing W (clamp on)
Nickled brass
2.0401 C38500
Standard sensor cable
– Cable connector (nickled brass)
– Cable sheath
2.0401
PVC
C38500
PVC
DIN 17440 AISI
Sensor holder W (Clamp On) 1.4308 CF-8
Sensor housing U (Clamp On) Plastic
Frame end-piece for U sensor
– Cast steel
1.4308 CF-8
Welding parts for W sensors
(insertion version)
1.4301 304
Sensor contact surface Chemical resistant plastic
Tensioning bands 1.4301 304
High temperature sensor cable
– Cable connector (stainless steel)
– Cable sheath
1.4301
PTFE
304
PTFE
DIN EN 573-3 ASTM B3221
U sensor fixation bar
– Cast aluminum EN AW-6063 AA 6063