Endress+Hauser Proline Prosonic Flow 93 User Manual

PROline Prosonic Flow 93 PROFIBUS-DP/-PA Table of Contents
Endress+Hauser 5
Table of Contents
1 Safety instructions . . . . . . . . . . . . . . 7
1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Installation, commissioning and operation . . . 7
1.3 Operational safety . . . . . . . . . . . . . . . . . . . . . . 7
1.4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.5 Notes on safety conventions and icons . . . . . . 8
2 Identification . . . . . . . . . . . . . . . . . . . 9
2.1 Device designation . . . . . . . . . . . . . . . . . . . . . 9
2.1.1 Nameplate of the transmitter . . . . . . . 9
2.1.2 Nameplate of the sensor. . . . . . . . . . .10
2.1.3 Nameplate of the Prosonic Flow U
sensors . . . . . . . . . . . . . . . . . . . . . . . .11
2.2 CE mark, declaration of conformity . . . . . . . . 11
2.3 Device certification PROFIBUS-DP/-PA . . . . . 11
2.4 Registered trademarks . . . . . . . . . . . . . . . . . 12
3 Installation. . . . . . . . . . . . . . . . . . . . 13
3.1 Incoming acceptance, transport and storage 13
3.1.1 Incoming acceptance . . . . . . . . . . . 13
3.1.2 Transport . . . . . . . . . . . . . . . . . . . . . 13
3.1.3 Storage . . . . . . . . . . . . . . . . . . . . . . . 13
3.2 Installation conditions . . . . . . . . . . . . . . . . . . 14
3.2.1 Dimensions . . . . . . . . . . . . . . . . . . . 14
3.2.2 Mounting location . . . . . . . . . . . . . . . 14
3.2.3 Orientation. . . . . . . . . . . . . . . . . . . . . .15
3.2.4 Inlet and outlet runs
(Clamp On version) . . . . . . . . . . . . . 15
3.2.5 Inlet and outlet runs
(Insertion version) . . . . . . . . . . . . . . . .16
3.2.6 Length of connecting cable . . . . . . . 16
3.3 Installation instructions . . . . . . . . . . . . . . . . . 17
3.3.1 Installing tensioning bands
(Clamp On) . . . . . . . . . . . . . . . . . . . 17
3.3.2 Use of weld studs for W / P sensors . .19
3.3.3 Installing the measuring sensors
Prosonic Flow P. . . . . . . . . . . . . . . . . .20
3.3.4 Installing the measuring sensors
Prosonic Flow P/W (Clamp On). . . . . .22
3.3.5 Installing the measuring sensors
Prosonic Flow W (Clamp On) . . . . . . .24
3.3.6 Installing the measuring sensors
Prosonic Flow U (Clamp On) . . . . . . .25
3.3.7 Explanation of terms for Prosonic Flow W
(Insertion version) . . . . . . . . . . . . . . . .28
3.3.8 Installing the measuring sensors
Prosonic Flow W
(single path Insertion version). . . . . . .29
3.3.9 Installing the measuring sensors
Prosonic Flow W
(dual path Insertion version) . . . . . . . .32
3.3.10 Installing the sound velocity measuring
sensors DDU 18 (accessories). . . . . .36
3.3.11 Installing the wall thickness measuring
sensors DDU 19 (accessories) . . . . . 37
3.3.12 Installing the wall-mount
transmitter housing . . . . . . . . . . . . . . 38
3.4 Post-installation check . . . . . . . . . . . . . . . . . . 40
4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . 41
4.1 Cable specifications for PROFIBUS . . . . . . . . 41
4.1.1 PROFIBUS-DP cable specifications . 41
4.1.2 PROFIBUS-PA cable specifications. . 44
4.2 Connecting the sensor connecting cable . . . . 46
4.2.1 Connecting Prosonic Flow
P / W / U / DDU 18 / DDU 19 . . . . . . . 46
4.2.2 Cable specifications . . . . . . . . . . . . . 47
4.3 Connecting the measuring unit . . . . . . . . . . . . 48
4.3.1 Connecting the transmitter . . . . . . . . 48
4.3.2 Terminal assignment . . . . . . . . . . . . . 49
4.3.3 Fieldbus connector . . . . . . . . . . . . . . 50
4.4 Potential equalisation . . . . . . . . . . . . . . . . . . . 51
4.5 Degree of protection . . . . . . . . . . . . . . . . . . . . 52
4.6 Post-connection check . . . . . . . . . . . . . . . . . . 54
5 Operation. . . . . . . . . . . . . . . . . . . . . . 55
5.1 Quick operation guide . . . . . . . . . . . . . . . . . . 55
5.2 Operation via the local display . . . . . . . . . . . . 56
5.2.1 Display and operating elements . . . . 56
5.2.2 Brief guide to the function matrix . . . . 59
5.2.3 Error messages . . . . . . . . . . . . . . . . . 61
5.3 Communications: PROFIBUS-DP/-PA . . . . . . . 62
5.3.1 PROFIBUS-DP/-PA technology . . . . . 62
5.3.2 PROFIBUS-DP system architecture . 62
5.3.3 PROFIBUS-PA system architecture . . 64
5.3.4 Acyclic data exchange . . . . . . . . . . . 66
5.4 Operation via PROFIBUS
configuration programs . . . . . . . . . . . . . . . . . 67
5.4.1 FieldTool operating program . . . . . . 67
5.4.2 Commuwin II operating program . . . . 68
5.5 Hardware configuration . . . . . . . . . . . . . . . . . 78
5.5.1 Configuration of write protection . . . . 78
5.5.2 Configuration of the device address . 79
6 Commissioning. . . . . . . . . . . . . . . . . 81
6.1 Function check . . . . . . . . . . . . . . . . . . . . . . . . 81
6.2 Commissioning via the local display . . . . . . . 82
6.2.1 “Sensor Installation” Quick Setup . . 82
6.2.2 “Commissioning” Quick Setup . . . . . 84
6.2.3 Commissioning with local display . . . 85
6.3 Commissioning via a configuration program . 86
6.3.1 Sensor installation . . . . . . . . . . . . . . . 86
6.3.2 Commissioning, Configuration of the
BUS interface . . . . . . . . . . . . . . . . . . . 93
6.3.3 Rescaling the input value. . . . . . . . . . 95

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English