6 Commissioning PROline Prosonic Flow 93 PROFIBUS-DP/-PA
84 Endress+Hauser
6.2.2 “Commissioning” Quick Setup
If the measuring device is equipped with a local display, all the device parameters
important for standard measuring mode can be configured easily and quickly using the
“Commissioning” Quick Setup menu (Fig. 66).
If a measuring device does not have a local display, the individual parameters and
functions must be configured via the configuration program, e.g. with Commuwin II
(see Page 69).
Fig. 66: “Commissioning” Quick Setup (only with local display)
+
+
+
E
E
-
+
ENDRESS+HAUSER
E
ESC
0424 042504230402 0422
➁
➀
1002B
2000
Setup
Sensor
see:
Quick Setup
“Sensor”
Unit
Volume Flow
Unit
Temperature
Unit
Viscosity
Unit
Length
Unit
Velocity
QS
Commission.
Language
Presetting
Quick Setup
System Units
HOME-POSITION
Volume
Viscosity
Length
Velocity
Quit
Configure another unit?
NOYES
Selection system units
Autom. configuration display?
Another quick setup?
NO
NO
Automatical parameterization
of the display
YES
Sensor
Temperature
F06-93xPBxxx-19-xx-xx-en-000
To Next Page
Loading...
