PROline Prosonic Flow 93 PROFIBUS-DP/-PA 8 Accessories
Endress+Hauser 119
8 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are
available for the transmitter and the sensor. The E+H service organisation can provide
detailed information on the ordering codes of your choice.
set
Accessory Description Order Code
Transmitter
Wall-mount housing
PROline Prosonic Flow 93
PROFIBUS-DP/-PA
Transmitter for replacement or for stock. Use the
ordering code to define the following
specifications:
–Approvals
– Degree of protection / version
– Cable entries
– Display / power supply / operation
– Software
– Outputs / inputs
93XXX
XXXXX ********
Mounting set for
transmitter 90 and 93
Mounting set for the wall-mount housing (remote
version). Suitable for:
– Wall mounting
– Pipe mounting
– Panel mounting
Mounting set for aluminium field housing:
suitable for pipe mounting (3/4"...3")
DK9WM
A
DK9WM
B
Flowmeter sensor W Clamp On sensor:
–20...+80 °C; DN 100...4000
–20...+80 °C; DN 50...300
Insertion sensor:
–40...+80 °C; DN 200...4000
DK9WF
A
DK9WF
B
DK9WF
K
Flowmeter sensor P Clamp On sensor:
–40...+80 °C; DN 100...4000
–40...+80 °C; DN 50...300
Clamp On sensor:
0...+170 °C; DN 100...4000
0...+170 °C; DN 50...300
DK9PF
A
DK9PF
B
DK9PF
E
DK9PF
F
Flowmeter sensor U Clamp On Sensor:
–20...+80 °C; DN 15...100 DK9UF
A
Sensor holder set for
Prosonic Flow W/P sen-
sors
– Sensor holder, fixed retaining nut, Clamp On
version
– Sensor holder, removable retaining nut, Clamp
On version
– Sensor holder, welding type, DN 200...300,
Insertion version, single channel
– Sensor holder, welding type, DN 300...400,
Insertion version, single channel
– Sensor holder, welding type, DN 400...4000,
Insertion version, single channel
– Sensor holder, welding type, DN 400...4000,
Insertion version, dual channel
DK9SH
A
DK9SH
B
DK9SH
C
DK9SH
D
DK9SH
E
DK9SH
F
To Next Page
Loading...
Need help?
General
