PROline Prosonic Flow 93 PROFIBUS-DP/-PA 3 Installation
Endress+Hauser 35
Fig. 39: Installing the dual path measuring sensors, step 13
14. Then screw the sensors into the sensor holders by hand. If you use a tool, the
maximum torque permissible is 30 Nm.
15. Insert the sensor cable plug into the opening provided and manually tighten the
plug to the stop.
Fig. 40: Installing the dual path measuring sensors, step 14 and 15
F06-9xWIxxxx-11-05-06-xx-013F06-9xWIxxxx-11-05-06-xx-014
To Next Page
Loading...
