Endress+Hauser Proline Prosonic Flow 93 - Page 89

PROline Prosonic Flow 93 PROFIBUS-DP/-PA 6 Commissioning
Endress+Hauser 89
“Insertion” sensor installation
Procedure
Selection - Input - display
Local display (Quick Setup)
▼
FieldTool
▼
Commuwin II
▼
▼
 BASIC FUNCTION
 SENSOR DATA CH1/CH2
 SENSOR PARAM.
 BASIC FUNCTION
 SENSOR DATA CH1/CH2
 SENSOR PARAM.
Manufacturer-specific Transducer
Block “PROSONIC 93 PBUS”:
 SENSOR DATA (VAH5)
 SENSOR PARAM. CH1/CH2
Type of measurement MEASUREMENT (6880) MEASUREMENT MEASUREMENT
CH1 (V3H0) / CH2 (V6H0)
Sensor type SENSOR TYPE (6881) SENSOR TYPE SENSOR TYPE CH1 (V3H1)
SENSOR TYPE CH2 (V6H1)
Sensor configuration SENSOR CONFIGURATION
(6882)
SENSOR CONFIGURATION SENSOR CONFIG. CH1 (V3H2)
SENSOR CONFIG. CH2 (V6H2)
▼
 BASIC FUNCTION
 PROCESS PARAM. CH1/CH2
 PIPE DATA
 BASIC FUNCTION
 PROCESS PARAM. CH1/CH2
 PIPE DATA
Manufacturer-specific Transducer
Block “PROSONIC 93 PBUS”:
 DE. MATRIX CH1/2 (VAH5)
 PIPE DATA CH1/CH2
Standard pipe selection PIPE STANDARD (6520) PIPE STANDARD PIPE STANDARD CH1/CH2
(V4H0)
Nominal diameter pipe NOMINAL DIAMETER (6521) NOMINAL DIAMETER NOMINAL DIAMETER CH1/CH2
(V4H1)
Pipe circumference CIRCUMFERENCE (6525) CIRCUMFERENCE CIRCUMFERENCE CH1/CH2
(V4H5)
Pipe diameter PIPE DIAMETER (6526) PIPE DIAMETER PIPE DIAMETER CH1/CH2 (V4H6)
Wall thickness WALL THICKNESS (6527) WALL THICKNESS WALL THICKNESS CH1/CH2
(V4H7)
▼
 BASIC FUNCTION
 SENSOR DATA CH1/CH2
 SENSOR PARAM.
 BASIC FUNCTION
 SENSOR DATA CH1/CH2
 SENSOR PARAM.
Manufacturer-specific Transducer
Block “PROSONIC 93 PBUS”:
 SENSOR DATA (VAH5)
 SENSOR PARAM. CH1/CH2
Didsplay sensor distance
(for sensor installation)
SENSOR DISTANCE (6886) SENSOR DISTANCE SENSOR DISTANCE CH1 (V3H6)
SENSOR DISTANCE CH2 (V6H6)
Didsplay arc length
(for sensor installation)
ARC LENGTH (6887) ARC LENGTH ARC LENGTH CH1 (V3H7)
ARC LENGTH CH2 (V6H7)
Didsplay path length
(for sensor installation)
PATH LENGTH (6888) PATH LENGTH PATH LENGTH CH1 (V3H8)
PATH LENGTH CH2 (V6H8)
! Note:
• All functions are described in detail in the “Description of Device Functions” manual, which is a separate part of this
Operating Instruction!
• The procedure for running through the “Sensor Installation” Quick Setup using the local display is explained on Page 82.