Endress+Hauser Proline t-mass 65F - Graphical Illustration of the Function Matrix

1 Function matrix Proline t-mass 65 Device Functions Proline t-mass 65
6 Endress+Hauser
1.2 Graphical illustration of the function matrix
ACTUAL FREQUENCY
(p. 33)
ASSIGN STATUS
(p. 40)
TEST DISPLAY
(p. 20)
VALUE SIMULATION
CURRENT (p. 27)
FAILSAFE VALUE
(p. 33)
VALUE SIMULATION
PULSE (p. 40)
REFERENCE DENSITY
(p. 57)
UNIT LENGTH
(p. 11)
BACKLIGHT
(p. 20)
SIMULATION CURRENT
(p. 27)
FAILSAFE MODE
(p. 33)
SIMULATION PULSE
(p. 39)
VALUE SIMULATION
CURRENT INPUT (p. 51)
DEVICE REVISION
(p. 54)
REFERENCE PRESSURE
(P. 57)
UNIT DENSITY
(p. 11)
CONTRAST LCD
(p. 19)
ACTUAL CURRENT
(p. 27)
TIME CONSTANT
(p. 33)
FAILSAFE MODE
(p. 39)
VALUE SIMULATION
SWITCH POINT (p. 45)
SIMULATION CUR-
RENT INPUT (p. 51)
DEVICE ID
(p. 53)
REFERENCE TEMPERA-
TURE (p. 57)
UNIT TEMPERATURE
(p. 11)
DISPLAY DAMPING
(p. 19)
FAILSAFE MODE
(p. 27)
OUTPUT SIGNAL
(p. 30)
OUTPUT SIGNAL
(p. 36)
VALUE SIMULATION
SWITCH POINT (p. 42) SIMULATION SWITCH
POINT (p. 44)
VALUE SIMULATION
STATUS INPUT (p. 49)
ACTUAL CURRENT
INPUT (p. 51)
MANUFACTURER ID
(p. 53)
PROCESS PRESSURE
(p. 56)
UNIT PRESSURE
(p. 11)
ACCESS CODE
COUNTER (p. 17)
FORMAT
(p. 19)
RESET TOTALIZER
(p. 22)
TIME CONSTANT
(p. 26)
VALUE f HIGH
(p. 29)
PULSE WIDTH
(p. 35)
SIMULATION SWITCH
POINT (p. 42)
ACTUAL STATUS RELAY
(p. 44)
SIMULATION STATUS
INPUT (p. 49)
FAILSAFE VALUE
(p. 51)
WRITE PROTECTION
(p. 53)
INSTALLATION FAC-
TOR (p. 56)
UNIT CORRECTED
VOLUME (p. 10)
STATUS ACCESS
(p. 16)
100% VALUE LINE 2
(p. 19)
UNIT TOTALIZER
(p. 22)
VALUE 20 mA
(p. 25)
VALUE f LOW
(p. 29)
PULSE VALUE
(p. 35)
ACTUAL STATUS
(p. 41)
TIME CONSTANT
(p. 44)
ACTUAL STATUS INPUT
(p. 48)
VALUE 20 mA
(p. 51)
HART PROTOCOL
(p. 53)
ZERO POINT ADJUST
(p. 56)
TEMPERATURE
(p. 8)
UNIT CORRECTED
VOLUME FLOW (p. 10)
DEFINE PRIVATE CODE
(p. 16)
100% VALUE LINE 1
(p. 18)
OVERFLOW
(p. 21)
VALUE 0_4 mA
(p. 25)
END VALUE
FREQUENCY (p. 28)
ASSIGN PULSE
(p. 34)
TIME CONSTANT
(p. 41)
OFF-VALUE
(p. 44)
MINIMUM PULSE
WIDTH (p. 48)
VALUE 0_4 mA
(p. 50)
FIELDBUS ADDRESS
(p. 53)
OFF VALUE LOW FLOW
CUT OFF (p. 55)
CORRECTED VOLUME
FLOW (p. 8)
UNIT MASS
(p. 9)
FACTOR ARBITRARY
MASS (p. 12)
T-DAT SAVE/LOAD
(p. 13)
ACCESS CODE
(p. 16)
ASSIGN LINE 2
(p. 18)
SUM
(p. 21)
FAILSAFE MODE
(p. 23)
CURRENT SPAN
(p. 24)
ASSIGN FREQUENCY
(p. 28)
VALUE SIMULATION
FREQUENCY (p. 34)
OFF-VALUE
(p. 41)
ON-VALUE
(p. 43)
ACTIVE LEVEL
(p. 48)
CURRENT SPAN
(p. 50)
TAG DESCRIPTION
(p. 53)
ON VALUE LOW FLOW
CUT OFF (p. 55)
MASS FLOW
(p. 8)
UNIT MASS FLOW
(p. 9)
TEXT ARBITRARY MASS
(p. 12)
QUICK SETUP
COMMISSION (p. 13)
LANGUAGE
(p. 16)
ASSIGN LINE 1
(p. 18)
ASSIGN TOTALIZER
(p. 21)
RESET ALL TOTALIZ-
ERS (p. 23)
ASSIGN CURRENT
(p. 24)
OPERATION MODE
(p. 28)
SIMULATION
FREQUENCY (p. 34)
ON-VALUE
(p. 41)
ASSIGN RELAY
(p. 43)
ASSIGN STATUS INPUT
(p. 48)
ASSIGN CURRENT
INPUT (p. 50)
TAG NAME
(p. 53)
ASSIGN LOW FLOW
CUT OFF (p. 55)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
MEASURING VALUES
(p. 8)
SYSTEM UNITS
(p. 9)
SPECIAL UNITS
(p. 12)
QUICK SETUP
(p. 13)
OPERATION
(p. 16)
USER INTERFACE
(p. 18)
TOTALIZER 1/2
(p. 21)
HANDLING TOTALIZER
(p. 23)
CURRENT OUTPUT 1/2
(p. 24)
PULSE/FREQ. OUT.
(p. 28)
RELAY OUTPUT 1/2
(p. 43)
STATUS INPUT
(p. 48)
CURRENT INPUT
(p. 50)
COMMUNICATION
(p. 53)
PROCESS PARAM.
(p. 55)
▼