Enterasys B5G124-24

Enterasys B5 Gigabit Ethernet Switch Hardware Installation Guide A-1
A
Specifications
Thisappendixprovidesthefollowinginformation:
Enterasys Networksreservestherighttochangespecificationsatanytimewithoutnotice.
Switch Specifications
Table A‐1providestheI/Oports,processorsandmemory,physical,andenvironmental
specificationsfortheB5models.
For information about... Refer to page...
Switch Specifications A-1
RPS Specifications A-5
Torque Values A-9
Pluggable Transceiver Specifications A-9
Console Port Pinout Assignments A-9
Regulatory Compliance A-9
Table A-1 B5 Switch Specifications
Item Specification
B5G124-24 and B5G124-24P2
RJ45
ports 1 through 24
Twenty-four 10BASE-T/100BASE-TX/1000BASE-T
compliant ports with auto-sensing and auto-negotiation via
RJ45 connectors. These ports also support 802.3at and
802.3af PoE connections on the B5G124-24P2.
Combo SFP ports 23 through 26 Four ports that support optional pluggable transceiver
100BASE-FX, 1000BASE-SX, 1000BASE-LX, and
1000BASE-TX fiber-optic connections.
When an SFP transceiver in SFP port 23 establishes a link,
RJ45 port 23 is disabled. When an SFP transceiver in SFP
port 24 establishes a link, RJ45 port 24 is disabled.
B5G124-48 and B5G124-48P2
RJ45
ports 1 through 48
Forty-eight 10BASE-T/100BASE-TX/1000BASE-T compliant
ports with auto-sensing and auto-negotiation via RJ45
connectors. These ports also support 802.3at and 802.3af
PoE connections on the B5G124-48P2.