8. Select the paper type from the print driver if the loaded print media is not standard plain paper. If a
user-specified print media is loaded in the PSI, you must specify the paper size setting by using the
print driver.
Note:
For more information about setting the paper size and type on the print driver, refer to the online Help
provided for the print driver.
Loading Envelope in the Priority Sheet Inserter (PSI)
Note:
❏ Be sure to fully insert the envelope until it stops. Otherwise, print media that is loaded on the MPF
will be fed.
❏ When you print on envelopes, be sure to specify the envelope setting on the print driver. If not
specified, the print image will be rotated 180 degrees.
When Loading # 10, DL, or Monarch
Load the envelope with the side to be printed on facing up, the flap side facing down, and the flap
turned to the right.
Epson AcuLaser C1750 Series User’s Guide
Printing Basics 108
To Next Page
Loading...
Need help?
General