Epson AcuLaser C1750N User Manual

Connection Type Connection Specifications
Wireless (Epson AcuLaser
C1750W only)
IEEE 802.11b/802.11g/802.11n
1
2
1USB Port
2Ethernet Port
Connecting Printer to Computer or Network
Connect the printer via Ethernet or USB. A USB connection is a direct connection and is not used for
networking. An Ethernet connection is used for networking. Hardware and cabling requirements
vary for the different connection methods. Ethernet cable and hardware are generally not included
with your printer and must be purchased separately.
The available feature for each connection type is shown in the following table.
Connection Type Available Feature
USB When connected via USB, you can instruct print jobs from a computer.
Ethernet When connected via Ethernet, you can instruct print jobs from a computer on
the network.
USB Connection
A local printer is a printer which is directly attached to your computer using the USB cable. If your
printer is attached to a network instead of your computer, skip this section and go to “Network
Connection” on page 27.
Epson AcuLaser C1750 Series User’s Guide
Network Basics 25

Epson AcuLaser C1750N Specifications

General

Brand	Epson
Model	AcuLaser C1750N
Category	Printer
Language	English