❏ A car for a long period of time.
❏ An environment where corrosive gases are present.
❏ An environment with salty air.
Managing the Printer
Checking or Managing the Printer with EpsonNet Config
When the printer is installed in a TCP/IP environment, you can check printer status and configure
settings using a web browser on a network computer. You can also use EpsonNet Config to check the
remaining volume of consumables and the paper loaded in this printer.
Note:
When using the printer as a local printer, you cannot use EpsonNet Config. For details about checking
the status of a local printer, refer to “Checking Printer Status with Status Monitor (Windows Only)” on
page 207.
Starting EpsonNet Config
Use the following procedure to start EpsonNet Config.
1. Launch your web browser.
2. Enter the IP address of the printer in the address bar.
The EpsonNet Config page appears.
Checking Printer Status with Status Monitor (Windows Only)
Status Monitor is a tool that is installed with your Epson print driver. It automatically checks the
printer status when you send a print job. Status Monitor can also check the status of the paper tray and
remaining amount of toner cartridges.
Starting Status Monitor
Double-click the Status Monitor icon on the taskbar or right-click the icon and select Select
Printer.
Epson AcuLaser C1750 Series User’s Guide
Maintenance 207
To Next Page
Loading...
Need help?
General