When the value is 0 for each color, you do not need to adjust the color registration.
When the value is not 0, enter the value according to the procedure in “Entering Values” on page
178.
Entering Values
The Operator Panel
Using the operator panel, enter the values that you found in the color registration chart to make
adjustments.
1. Press the
(Menu) button.
2. Select Admin Menu, and then press the
button.
3. Select Maintenance Mode, and then press the
button.
4. Select Adjust ColorRegi, and then press the
button.
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting 178
To Next Page
Loading...
