2. Remove any paper jammed from the front of the printer.
3. Replace the PSI in the printer.
Important:
Do not use excessive force on the PSI. Doing so could damage it or the inside of the printer.
Clearing Paper Jams From the Back of the Printer
Important:
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting 155
To Next Page
Loading...
Need help?
General