Epson AcuLaser C1750N User Manual

Values:
Off
Does not show the alert message when the toner is low.
On*
Shows the alert message when the toner is low.
Maintenance Mode
Use the Maintenance Mode menu to initialize Non-Volatile Memory (NVM), configure the plain
paper quality adjustment settings, and configure the security settings.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To display the version of the controller.
Adjust PaperType
Purpose:
To adjust the paper type.
Values:
Plain Light
Normal*
Labels Light
Normal*
Adjust BTR
Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage,
set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print
output, try to increase the voltage. If you see white spots on the print output, try to decrease the
voltage.
Epson AcuLaser C1750 Series User’s Guide
Using the Operator Panel Menus 142

Epson AcuLaser C1750N Specifications

General

Brand	Epson
Model	AcuLaser C1750N
Category	Printer
Language	English