Other Problems
Problem Action
Condensation has occurred inside the
printer.
This usually occurs within several hours after you heat the room in winter. This also
occurs when the printer is operating in a location where relative humidity reaches
85% or more. Adjust the humidity or relocate the printer to an appropriate
environment.
Understanding Printer Messages
The printer LCD panel displays messages describing the current state of the printer and indicates
possible printer problems you must resolve. This section describes messages, their meanings, and how
to clear the messages.
Important:
When an error message is displayed, the print data remaining on the printer and the information
accumulated in the memory of the printer are not secured.
Message What You Can Do
FusingUnit Error
Restart Printer
Error 010-397
Restart Printer
Turn off the printer, and then on. If this does not solve the problem, contact the
Epson local representative office or an authorised dealer.
See also:
“Contacting Epson Support” on page 216
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting 182
To Next Page
Loading...
Need help?
General