Epson AcuLaser C1750N User Manual

Setting the PowerSaver Time Option
You can set the power saver time for the printer. The printer switches to the Power Saver Mode after
the specified time.
1. Press the
(Menu) button.
2. Select Admin Menu, and then press the
button.
3. Select System Setup, and then press the
button.
4. Select PowerSaver Time, and then press the
button.
5. Select Mode1 or Mode2, and then press the
button.
6. Press the
or button to select the desired value, and then press the button.
You can select from 5–30 minutes for Mode1 or 1–6 minutes for Mode2.
7. To return to the previous screen, press the
(Back) button.
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, all the menu parameters or data, except
the parameters for the network are reset to their factory default values.
1. Press the
(Menu) button.
2. Select Admin Menu, and then press the
button.
3. Select Maintenance Mode, and then press the
button.
4. Select Initialize NVM, and then press the
button.
5. Ensure that Are you sure? appears, and then press the
button. The printer starts initializing
the Non-Volatile Memory (NVM).
6. When the Initialized. message appears, turn off and then on the printer to apply the settings.
Epson AcuLaser C1750 Series User’s Guide
Using the Operator Panel Menus 151

Epson AcuLaser C1750N Specifications

General

Brand	Epson
Model	AcuLaser C1750N
Category	Printer
Language	English