Epson AcuLaser C1750N User Manual

Random Spots/Blurred Images
Problem Action
The printed result has random spots or
is blurred.
Ensure that the toner cartridges are installed correctly.
See also:
“Installing a Toner Cartridge” on page 204
If you use non-genuine brand toner cartridges, install genuine brand toner
cartridges.
Clean up the fusing unit.
1. Load one sheet of paper on the MPF, and then print a solid image all over paper.
2. Load the printed sheet with the side to be printed on facing down, and then print
a blank sheet of paper.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
The Entire Output Is Blank
If this trouble happens, contact the Epson local representative office or an authorised dealer.
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting 166

Epson AcuLaser C1750N Specifications

General

Brand	Epson
Model	AcuLaser C1750N
Category	Printer
Language	English