Epson AcuLaser C1750N - Page 141

Auto Log Print
Purpose:
To automatically print a job history report after every 10 jobs.
Values:
Off*
Does not automatically print a job history report.
On
Automatically prints a job history report.
Note:
The Job History report can also be printed using the Information Pgs menu.
mm/inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
millimeter(mm)*
Specifies the default measurement unit.
inch(")
Def. Paper Size
Purpose:
To specify the default paper size.
Values:
A4 - 210x297*
Letter - 8.5x11
Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Epson AcuLaser C1750 Series User’s Guide
Using the Operator Panel Menus 141