Epson AcuLaser C1750N - Adj. Fusing Unit

Note:
The print quality changes depending on the values you select for this item.
Values:
Plain 0*
-3 – +3
Bond 0*
-3 – +3
Light Card 0*
-3 – +3
Labels 0*
-3 – +3
LW Gloss Card 0*
-3 – +3
Envelope 0*
-3 – +3
Recycled 0*
-3 – +3
Adj. Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the
temperature, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has
curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to
increase the temperature.
Note:
The print quality changes depending on the values you select for this item.
Epson AcuLaser C1750 Series User’s Guide
Using the Operator Panel Menus 143