Click Start — Control Panel — Printer (for Windows Server 2008).
A list of available printers appears.
2. Right-click the icon for your printer, and then select Printing Preferences.
The EPSON AL-C1750N/EPSON AL-C1750W Printing Preferences screen appears.
3. Make selections on the driver tabs, and then click OK to save your selections.
Note:
For more information about Windows print driver options, click Help on the print driver tab to view the
online Help.
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before
sending the job to the printer. For example, if you want to use Photo print-quality mode for a
particular graphic, select this setting in the driver before printing that job.
1. With the desired document or graphic open in your application, access the Print dialog box.
2. Select the Epson AcuLaser C1750 series and click Preferences to open the print driver.
3. Make selections on the driver tabs. See the following table for specific printing options.
Note:
In Windows, you can save current printing options with a distinctive name and apply them to other
print jobs. Make selections on the Paper/Output, Image Options, Layout, Watermarks, or
Advanced Settings tab, and then click Save under Saved Settings on the Paper/Output tab.
Click Help for more information.
4. Click OK to save your selections.
5. Print the job.
See the following table for specific printing options:
Epson AcuLaser C1750 Series User’s Guide
Printing Basics 118
To Next Page
Loading...
Need help?
General