3. Select Add a network, wireless or Bluetooth printer.
4. In the list of available printers, select the one you want to use, and then click Next.
Note:
❏ In the list of available printers, the WSD printer is displayed in the form of http://IP address/
ws/.
❏ If no WSD printer is displayed in the list, enter the printer’s IP address manually to create a WSD
printer. To enter the printer’s IP address manually, follow the instructions below. For Windows
Server 2008 R2, to create a WSD printer, you must be a member of Administrators group.
1. Click The printer that I want isn’t listed.
2. Select Add a printer using a TCP/IP address or hostname and click Next.
3. Select Web Services Device from Device type.
4. Enter the printer’s IP address in the Hostname or IP address text box and click Next.
❏ Before installing the driver using the Add Printer wizard on Windows Server 2008 R2 or
Windows 7, perform one of the followings:
- Establish the Internet connection so that Windows Update can scan your computer.
- Add the print driver to your computer in advance.
5. If prompted, install the print driver on your computer. If you are prompted for an administrator
password or confirmation, type the password or provide confirmation.
6. Complete the additional steps in the wizard, and then click Finish.
7. Print a test page to verify print installation.
a
Click Start — Control Panel — Hardware and Sound — Printers (Start — Devices
and Printers for Windows Server 2008 R2 and Windows 7).
b
Right-click the printer you just created, and then click Properties (Printer properties
for Windows Server 2008 R2 and Windows 7).
c
On the General tab, click Print Test Page. When a test page is printed successfully,
installation is complete.
Epson AcuLaser C1750 Series User’s Guide
Printing Basics 131
To Next Page
Loading...
Need help?
General