Epson AcuLaser C1750N - Page 146

Values:
Off*
Does not automatically execute counter measures for curling/separating
discharge of the paper.
On
Automatically executes counter measures for curling/separating discharge of
the paper.
Chart
Purpose:
To print various charts that can be used for diagnosing your printer.
Values:
Ghost
Prints a chart to check for ghost printing.
4Colors
Prints bands of yellow, magenta, cyan, and black with varying density.
Alignment
Prints a chart, and then check for proper alignment of the print image on the
paper.
Drum Refresh
Prints a chart to check the light fatigue of the drum cartridge.
Initialize NVM
Purpose:
To initialize NVM for system parameters. After executing this function and rebooting the printer, all
the menu parameters, except the parameters for the network, are reset to their factory default values.
See Also:
“Resetting to Factory Defaults” on page 151
Non-GenuineToner
Purpose:
To use toner cartridge of another manufacturer.
Note:
❏ Using non-genuine toner cartridges may make some printer features unusable, reduce print quality
and decrease the reliability of your printer. Epson recommends only new Epson brand toner
cartridges for your printer. Epson does not provide warranty coverage for problems caused by using
accessories, parts, or components not supplied by Epson.
❏ Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Epson AcuLaser C1750 Series User’s Guide
Using the Operator Panel Menus 146