The Complete configuration screen appears.
10. Wait a few minutes until the printer restarts to establish the wireless network.
11. Print a Printer Settings page from the operator panel.
See “Printing a Printer Settings Page” on page 125.
12. Confirm that “Wireless Status” is shown as “Good”, “Acceptable” or “Low” on the report.
Note:
When “Wireless Status” is “No Reception”, check if the wireless settings are correctly configured. To
reconfigure the wireless settings, click Next on the Complete configuration screen and then click
Return.
13. Click Next.
14. Follow the instructions until the Check Setup screen appears.
15. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
Epson AcuLaser C1750 Series User’s Guide
Network Basics 54
To Next Page
Loading...
