The wireless configuration is complete.
WPS-PIN
Note:
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and
register devices required for wireless configuration, by entering PIN assignments to a printer and
computer. This setting, performed through access point, is available only when the access points of your
wireless router supports WPS.
1. Select WPS-PIN, and then click Next.
2. Follow the instructions until the Check Setup screen appears.
3. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
Epson AcuLaser C1750 Series User’s Guide
Network Basics 56
To Next Page
Loading...
