Epson AcuLaser C1900 - Making Extended Settings

126 Using the Printer Software with Macintosh
5. Specify the Binding Margin for the front and back sides of the
paper.
6. Select whether the front or back side of the paper is to be
printed as the Start Page.
7. Click OK to close the Duplex Settings dialog box.
8. Click OK on the Layout dialog box to accept the settings.
Making Extended Settings
You can make various settings in the Extended Setting dialog box,
for example Page Protect. To open the dialog box, click the
Extended Setting icon on the Basic Settings dialog box.
Uses the settings
specified on the printer
check box:
Select this button to use the
Offset, Skip blank page, and
Ignore the selected paper size
settings in the control panel.