362 Working with Fonts
Note:
Depending on the print density, or on the quality or color of the paper,
the OCR B font may not be readable. Print a sample and make sure the
font can be read before printing large quantities.
Printing font samples
You can print samples of the fonts available in each mode by using
the control panel's Information Menu. Follow these steps to print
font samples.
1. Make sure that paper is loaded.
2. Make sure the LCD panel displays Ready or Sleep, then press
the Enter button.
3. Press the d Down button to select the font sample for the
appropriate mode.
4. Press the Enter button to print the selected font sample
sheet.
Adding More Fonts
You can add a wide variety of fonts to your computer. Most font
packages include an installer for this purpose.
EPSON Orator -
EPSON Script -
EPSON Presentor -
EPSON Sans serif -
OCR B -
To Next Page
Loading...
