190 Installing Options
6. Plug the printer’s power cord into an electrical outlet.
7. Turn on the printer.
8. To confirm that the option is installed correctly, print a status
sheet. See “Printing a Status Sheet” on page 196.
Removing a memory module
Perform the installation procedure in reverse.
Adobe PostScript 3 ROM Module
Follow these steps to install the optional Adobe PostScript 3 ROM
module.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
c
Caution:
Before you install the ROM module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
Note:
❏ The optional ROM modules that expand your printer’s features
differ, depending on the country of purchase.
❏ The Adobe PostScript 3 ROM Module cannot be used for a
Macintosh connected with the IEEE 1394 Type B Interface Card.
To Next Page
Loading...
