Installing Options 189
6
6
6
6
6
6
6
6
6
6
6
6
4. Insert the DIMM into either slot until the two clips lock onto
the DIMM. Make sure that the S0 slot has a module at all
times.
c
Caution:
❏ Do not force the DIMM into the slot.
❏ Be sure to insert the DIMM facing the correct way.
❏ You should not remove any modules from the circuit
board. Otherwise, the printer will not work.
5. Return the printer to its original state as shown below.
To Next Page
Loading...
