44 Paper Handling
❏ When loading transparencies in the MP tray, insert the short
edge first and with the printable surface facing up.
c
Caution:
Sheets that have just been printed on may be hot.
Envelopes
The print quality of envelopes may be irregular because different
parts of an envelope have different thicknesses. Print one or two
envelopes to check the print quality.
c
Caution:
Do not use window envelopes unless they are specifically
designed for laser printers. The plastic on most window envelopes
will melt when it comes into contact with the fuser.
Note:
Depending on the quality of envelopes, the printing environment, or the
printing procedure, envelopes might be wrinkled. Make a trial print run
before you print on a lot of envelopes.
The following table shows important settings you have to make
when using envelopes.
Paper Source MP tray only (up to 10 envelopes)
To Next Page
Loading...
