Epson AcuLaser C1900 - Using an additional driver

148 Setting Up Your Printer on a Network
You need to set the client computers so that they can use the
printer on a network. See the following pages for details.
❏ “With Windows Me/98/95” on page 155
❏ “With Windows XP/2000” on page 157
❏ “With Windows NT 4.0” on page 160
Using an additional driver
When the printer server’s OS is Windows 2000, XP, or Windows
NT 4.0, you can install the additional drivers in the server. The
additional drivers are for client computers that have different OS
from the server.
Follow these steps to set a Windows XP, 2000, or Windows NT
4.0 as a printer server, and install the additional drivers.
Note:
❏ You must access Windows XP, 2000, or Windows NT 4.0 as the
Administrators of the local machine.
❏ If the Printer server’s OS is Windows NT 4.0, the Additional driver
can be used only on Service Pack 4 or later.
1. For a Windows 2000 or NT 4.0 printer server, click Start, point
to Settings, and click Printers.
For a Windows XP printer server, click Start, point to Printers
and Faxes. For Windows XP Home edition users, point to
Control panel first, then click Printers and Faxes.
2. Right-click your printer icon, and click Sharing in the menu
that appears.