Epson AcuLaser C1900 - Manually Feeding Paper

Paper Handling 35
2
2
2
2
2
2
2
2
2
2
2
2
The printer will search for a paper source containing the specified
paper size in the following order.
Standard configuration:
MP tray
Note:
❏ If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
❏ If you select an envelope for the Paper Size setting, it can be fed only
from the MP tray regardless of the Paper Source setting.
❏ You can change the priority of the MP tray by using the MP Mode
setting in the control panel’s Setup Menu. For details, see “Setup
Menu” on page 213.
With optional 500-Sheet Paper Cassette Unit installed:
MP tray
Lower cassette
Note:
❏ If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
❏ If you select an envelope for the Paper Size setting, it can be fed only
from the MP tray regardless of the Paper Source setting.
❏ You can change the priority of the MP tray by using the MP Mode
setting in the control panel’s Setup Menu. For details, see “Setup
Menu” on page 213.
Manually feeding paper
Manual feeding is similar to normal paper feeding, except that
you need to press the N Start/Stop button to print the rest of the
pages after the first page is printed. This can be helpful when you
want to check the print quality after the first page is printed.