36 Paper Handling
Follow these steps to feed paper manually.
1. Access the printer driver by one of the following methods.
❏ To access the printer driver from your application, select
Print or Page Setup from the File menu. You also need to
click Setup, Options, Properties, or a combination of these
buttons.
❏ To access the printer driver from Windows Me, 98, 95, XP,
2000, or NT 4.0, click Start, point to Settings, and click
Printers. Next, right-click the EPSON AL-C1900
Advanced icon and click Properties (in Windows Me, 98,
or 95), Printing Preferences (in Windows XP or 2000), or
Document Defaults (in Windows NT 4.0).
❏ To access the printer driver from Macintosh, select Print
from the File menu on any application or select Chooser
from the Apple menu and click the AL-C1900 icon
beforehand.
2. For Windows, click the Basic Settings tab, then select the
Manual Feed check box. For Macintosh, click the Manual Feed
check box on the Basic Settings dialog box.
3. Select the correct paper size from the Paper Size list.
4. If paper of the selected size is already loaded, go on to the next
step. Otherwise, remove any paper remaining in the tray.
Load a sheet or a stack of the selected size paper with the
printable side up. Adjust the paper guides to match the paper
size you are loading.
Note:
Load paper into the MP tray and the optional lower cassette with
the printable surface facing up.
5. Print a document from your application. The LCD panel
shows Manual Feed and the selected page size.
To Next Page
Loading...
