Epson AcuLaser C1900 - Using the Reserve Job Function

128 Using the Printer Software with Macintosh
Using the Reserve Job Function
The Reserve Job function allows you to store print jobs in the
printer’s Hard Disk Drive and to print them later directly from
the printer’s control panel. Follow the instructions in this section
to use the Reserve Job function.
Note:
You need an optional Hard Disk Drive installed in your printer in order
to use the Reserve Job function. Make sure that the drive is correctly
recognized by the printer driver before you start using the Reserve Job
function.
The table below gives an overview of the Reserve Job options.
Each option is described in detail later in this section.
Select button: Selects spool file saving folder.
Cancel button: Click this button to exit the dialog
box or printer driver without
saving your settings.
OK button: Click this button to save your
settings and to exit the dialog box
or printer driver. The settings are
effective until you make new
settings and click OK again.
Reserve Job Option Description
Re-Print Job Lets you print the job now and store it for later
reprinting.
Verify Job Lets you print one copy now to verify the content
before printing multiple copies.
Stored Job Lets you save the print job without printing it now.