EasyManua.ls Logo

Epson AcuLaser C1900 - Installing the Printer Driver from the CD-ROM

Epson AcuLaser C1900
396 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
162 Setting Up Your Printer on a Network
If the printer driver is installed in the client beforehand, you
need to select the new printer driver or the current printer
driver. When the prompt to select the printer driver appears,
select the printer driver according to the message.
If the additional driver for Windows NT 4.0 is installed in the
Windows XP/2000 printer server, go to the next step.
If the additional driver for Windows NT 4.0 is not installed in
the Windows XP/2000 printer server or the printer server’s OS
is Windows Me/98/95, go to “Installing the printer driver from
the CD-ROM” on page 162.
5. Select whether to use the printer as the default printer or not,
then click OK.
6. Click Finish.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the
clients when setting the network system as follows:
The additional drivers are not installed in the Windows
XP/2000/NT 4.0 printer server.
The printer server’s OS is the Windows Me/98/95 and the
client’s OS is the Windows XP/2000/NT 4.0.
The on-screen displays on the following pages may differ
depending on the version of Windows OS.
Note:
When installing in Windows XP/2000/NT 4.0 clients, you must
access Windows XP/2000/NT 4.0 with the Administrator.

Table of Contents

Other manuals for Epson AcuLaser C1900

Related product manuals