Using the Printer Software with Windows 97
3
3
3
3
3
3
3
3
3
3
3
3
Status Alert window
The Status Alert window indicates what type of error has
occurred and offers you a possible solution. The window closes
automatically once the problem is cleared.
This window will also appear according to the selected
notification in the Monitoring Preferences dialog box.
If you wish to see information about printer consumables, click
EPSON Status Monitor 3 button. Once this button is clicked, the
Status Alert window will not disappear even after a problem is
cleared. Click Close to close the window.
Stopping monitoring
You can stop monitoring the printing status by clearing the
Monitor the Printing Status check box in the printer driver’s Utility
menu if you don’t need to monitor the printer at all.
Note:
❏ The Monitor the Printing Status check box is displayed in the
Utility menu of Document Defaults in Windows NT 4.0, or in the
Utility menu of Printing Preference in Windows XP/2000.
❏ You can find out the current printer status by clicking the EPSON
Status Monitor 3 icon in the printer driver’s Utility menu.
Setting Monitored Printers
You can use Monitored Printers utility to change the type of
printers that EPSON Status Monitor 3 will monitor. When you
install EPSON Status Monitor 3, this utility is also installed.
Usually, it is not necessary to change a setup.
To Next Page
Loading...
