286 Troubleshooting
The printout position is not correct
Graphics do not print correctly
The surface is rough (duplex printing, coated
paper)
Cause What to do
The page length and margins
are set incorrectly in your
application.
Make sure that you are using the correct
page length a nd margin settings in y our
application.
Cause What to do
The printer emulation setting
in your application may be
incorrect.
Make sure that your application is set
for the printer emulation you are using.
For example, if you are using the LJ4
emulation mode, make sure that your
application is set to use a LaserJet 4
printer.
You may need more memory. Graphics require large amounts of
memory. Install an appropriate
memory module. See “Memory
Module” on page 186.
Cause What to do
Duplex printing on damp
coated paper may produce a
rough printed surface.
Use coated paper that is newly
unwrapped. Always store coated paper
in a dry environment.
To Next Page
Loading...
