210 Functions of the Control Panel
Emulation Menu
Use this menu to select the printer emulation mode. You can
specify different emulations for each interface; in other words, for
each computer you connect the printer to. Since each emulation
mode has its own specific options, make settings in the LJ4,
ESC P2, FX, GL2, or I239X menu, as necessary. The settings you
can choose from are the same for every interface.
* Available only when the optional Adobe PostScript 3 ROM module is installed.
** Available only when an optional Type-B interface card is installed.
Printing Menu
This menu allows you to make standard print settings, such as
Page Size and Orientation, when printing from an application or
operating system that does not support your printer driver. Be
sure to use the printer driver to make these settings whenever you
can, since settings made on your computer always override these
settings.
Item Settings (default in bold)
Parallel Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2
USB Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2
Network Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2
AUX** Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2
To Next Page
Loading...
