Functions of the Control Panel 217
7
7
7
7
7
7
7
7
7
7
7
7
Size Ignore
If you want to ignore a paper size error, select On. When you turn
this item on, the printer keeps printing even if the image size
exceeds the printable area for the specified paper size. This may
cause smudges because of the toner that is not transferred onto
the paper properly. When this item is turned off, the printer stops
printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues
printing after a certain period of time when one of the following
errors occurs: Paper Set, Print Overrun, or Mem Overflow. When
this option is off, you must press the
Start/Stop button to resume
printing.
Page Protect
Allocates additional printer memory for printing data, as
opposed to receiving it. You may need to turn this setting on if
you are printing a very complex page. If a Print Overrun error
message appears on the LCD panel during printing, turn this
setting on and reprint your data. This reduces the amount of
memory reserved for receiving data so your computer may take
longer to send the print job, but it will allow you to print complex
jobs. Page Protect usually works best when Auto is selected. You
will need to increase your printer's memory if memory errors
continue to occur.
Note:
Changing the Page Protect setting reconfigures the printer's memory,
which causes any downloaded fonts to be deleted.
Toner Out
If the item is set to Stop, the printer lets you know when the toner
is out. To disable this function, set this item to Continue.
To Next Page
Loading...
